Diesel forced air heater 220 kW

This excellent diesel forced air heater manufactured by Master helps to efficiently heat different rooms and shelters.

This diesel forced air heater can be used to warm up construction tents, temporary scaffolding structures, etc. using heat pipes that you can use to direct heat to proper locations.

There are two versions of heat pipes: either a four-pipe system where the diameter of one pipe is 320 mm, or one large pipe system where the diameter of one pipe is 730 mm; the length of one pipe is 7.6 metres.

Conditions for use:

• Upon starting up, the heater requires about 9.2 kW of power; afterwards, it consumes 4.2 kW
• The heater requires one 16 A three-phase power cord
• The cords need to function correctly because otherwise, the heater does not start up
• The power cord should be discrete and, if possible, in the immediate vicinity of the electrical board since the power inside the cord starts to decrease at a certain length
• The customer must consider possible expenses in cases we have to come to the site for reasons not caused by us, e.g. we identify that there is a problem with electricity; in these cases, our hourly rate of €45 + VAT will apply (minimum cost €45 + VAT)
• At events, the hourly rate of the heater technician is €30 + VAT

Technical data:

• Wattage: 220 kW
• Air flow: 12,500 m³/h
• Fuel consumption: ca 19.5 l/h
• Dimensions (l x w x h): 2510 x 840 x 1440 mm
• Power consumption: 7.6 A (in constant operation)
• Smoke pipe Ø: 200 mm
• Hot air outlet Ø: 4×320 mm or 1×730 mm
• Net weight: 326 kg
• Supply voltage: 400/50 V/Hz
• A summer-winter switch only for ventilation
• Fuel preheater
• High-efficiency heat exchanger